When it comes to maintaining a sprinkler system, water hammer should not be taken lightly. Water hammer occurs when there is a sudden increase in pressure or flow within the system, often caused by an abrupt shutoff of water flow. Not only can it damage your sprinkler system, but if left unchecked, water hammer can also cause significant property damage and even injury. Fortunately, there are several steps you can take to prevent water hammer from damaging your sprinkler system.
In this article, we will explain what water hammer is and provide some helpful tips for preventing it from occurring in your sprinkler system. We will also discuss the importance of regularly inspecting your sprinkler system components to ensure that water hammer does not occur. Finally, we will provide some additional resources for further reading and advice on properly maintaining your sprinkler system. By following these steps and understanding the causes and prevention strategies of water hammer, you can protect your sprinkler system and prevent any unwanted damage.
Water hammer is a phenomenon that happens when the flow of water is suddenly increased or stopped. When this occurs, a pressure wave forms and moves through the piping system. This pressure wave can cause a loud banging or hammering sound when the pressure wave reaches the end of the pipe. If the pressure wave is strong enough, it can cause the pipes to vibrate and even shake, which can lead to structural damage and failure of the sprinkler system. In extreme cases, water hammer can even cause flooding, property damage, and even personal injury. The key to preventing water hammer in a sprinkler system is to ensure that the system is installed and maintained correctly.
One way to prevent water hammer is to install shock absorbers on the main and secondary pipes of the sprinkler system. These shock absorbers help to cushion the impact of the pressure wave as it passes through the piping. Additionally, the shock absorbers should be inspected and maintained on a regular basis to ensure that they are working correctly. Another important step is to install an air chamber in the sprinkler system. An air chamber provides a space to absorb the pressure wave and dissipate it before it reaches the end of the pipe. An air chamber should be inspected and cleaned annually to ensure the system is functioning correctly.
How To Fix Water Hammer And Air In Pipes Sprinkler School
Preventing Water Hammer Dft Inc
Water Hammer And How It Can Damage Pipes Plumbing Systems
Water Hammer And Air In Pipes
How To Turn A Lawn Sprinkler System Back On In The Spring
Landscape Irrigation Equipment Part 7 Valves Home Garden Information Center
How To Use Water Hammer Arresters Stop Banging Lines Diy
Water Hammer What Is It And How Does Impact Firefighting
Causes Of Water Hammer And How To Fix It
The Most Common Causes Of Water Hammer And How To Stop It Anchor Pumps
What Causes Banging Pipes And How To Stop It Oatey
How To Optimise The Location And Performance Of Your Water Hammer Arrestor
Here S How Stop Water Bang Noise In Your Plumbing
Sprinkler Valve Issue Water Hammer Page 2 Pelican Parts Forums
Injector Tune Up Time
Water Hammer Control Device Installation Location Codes Manuals Sources To Fix Banging Pipes
Water Hammer Control
3 Easy Ways To Stop Water Hammer Wikihow
Home Sprinkler Systems Preparing Your System For Winter 4 719 Extension